Smart Alternative to Concrete Containment Systems
POLY DIKE wall containment systems are used in place of concrete as secondary containment around storage tanks. POLY DIKE walls vary in height from 12″ to 30″ in 6″ increments. Usually, a system is custom designed for each application, but, similar to the POLY CURB, sections and corners may be purchased for stock
The POLY DIKE wall containment system may be used as a stand-alone wall system or with a fabric liner. POLY DIKE applications are similar to POLY CURB applications, but where greater capacities or barrier heights are required.
Construction and Capabilities of the Poly DikeTM Dike Wall Containment System
The POLY DIKE wall containment system is composed of truncated triangular fiberglass structures manufactured of various thicknesses based on wall height. POLY DIKE’S unique design allows both sides of the wall to share equally in load bearing. POLY DIKE is flexible. The modular design coupled with wall heights varying from 12" to 30" allows flexible use of floor space to meet capacity requirements. Note that when determining system size the base of the POLY DIKE wall varies in width from approximately 12" to 27" based on wall height.
GREAT FOR MILITARY AND MUNICIPLE GOVERNMENTS
The most common ways a POLY DIKE wall containment system is used are: (1) Bolted and sealed to a concrete pad, or (2) Bolted together and used with a flexible liner.
(1) Sealed to a concrete pad
POLY DIKE secondary containment walls may be sealed to a concrete pad by one of two methods: The customer can seal the walls along the base flange with concrete fasteners and caulk sealant; the customer can chemically bond the base flange to the concrete floor. This system is chemically resistant, non-porous and monolithic. This system is particularly appropriate for areas which include plumbing, equipment, or tank supports and may be bonded over or around these obstructions if required.
(2) In conjunction with a fabric liner
A one-piece liner may be used to cover the floor. The liner is large enough to go up and over the POLY-DIKE wall containment so it can be secured to the wall tops with fiberglass “liner locks.” Securing the clips to the wall tops with self-tapping screws holds the liner in place. For aesthetics, the liner may be trimmed along the outside edge behind the “liner lock”. Limited site preparation, no excavation, fast, clean installation, immediate use, nonporous design, superior chemical resistance and portability are only some of the many POLY DIKE wall containment and secondary containment advantages.
Effective Alternative to Concrete Containment Dikes
Searching for a better alternative to traditional concrete dikes? Consider the Poly Dike™ modular dike wall system and get a corrosion resistant, lightweight, and easy-to-install secondary containment. The Poly Dike™ provides superior protection for above ground storage tanks. This versatile spill containment system comes in a standard or custom design and varies in height from 12 inches to 30 inches. the POLY Dike is most commonly used as secondary containment for harmful liquid and solid materials, including:
- Chemical storage tanks
- Hazardous material work areas
- Process treatment sites
- Rainwater runoff diking
Not secured to the substrate, the Poly Dike MPE is perfect for long-term or temporary use in:
- Parking lots
- Rocky soil
- Muddy soil
- Frozen soil
- Concrete areas
Using the Poly Dike wall secondary containment system offers:
Click Here to Download this article
- Limited site preparation
- No excavation
- Fast, clean installation
- Immediate use
- Non-porous design
- Superior chemical resistance
- Portability and Re-useable